Model Engine Ignition‎ > ‎Coils‎ > ‎

S/S Model Engine Coil

    (3-wire version shown above)


This coil may be used on all of our IC engines.   (see www,model-engine-plans.com for more details on our engine plans)

This is a compact, quality USA built coil.  It contains three prongs at one end, one for +, one for -, and the third for the spark plug.  These coils are surrounded by a cardboard housing and epoxy-filled, making them very durable.  The perfect coil if space is tight.  Made in USA!

Specifications (approximate):

  • Size: 1" Diameter by 1.250" long
  • Weight: 1.2 oz
  • Primary resistance: 0.9 ohm
  • Secondary resistance: 5K Ohms,
  • Operating voltage: 3 to 6 volts DC
Note: the 4-wire option will contain two terminal tabs for the primary, and 2 exposed wires for the secondary (isolated windings).  Either one will work just fine in most all applications.


 


Item#: COIL-M
* SOLD OUT *
Price: $45